#12 x 2-1/4 High-Performance Wood-To-Metal Self-Drilling Screw - 50 Pack
Price
Want to view pricing for this product?
Log In or Create Login
Not a Kimball Midwest Customer?
Register
Log In or Create Login
Not a Kimball Midwest Customer?
Register
Package Quantity: 50
Package Weight: 1 lbs
Item: 444218
- SELF-DRILLING DESIGN - Eliminates pre-drilling for the fastest and easiest attachment of wood to steel.
- WOOD-TO-METAL - Plywood floor board to steel frames. Plywood roofboard to steel frames. 2x4 headers to steel frames. Plywood fascia to steel frames. Wood mansard roofing to steel frames.
- NON-WALKING DRILL POINT - Improves drilling performance while requiring less effort.
- REAMER WING DESIGN - Special “reamer wings” behind the point enlarge the hole in wood to prevent thread engagement during drilling, then shear off on contact with metal to allow full thread engagement for maximum strength.
- GRAY STALGARD - Durable multi-layer, corrosion-resistant coating engineered to provide optimal performance in demanding construction applications. Provides 1000+ hours of resistance with no red rust per ASTM B117. Was developed for use with ACQ-treated lumber with retention levels no higher than .25 PCF.
- LOWER TAPPING TORQUE - The lubricity of Gray StalGard allows faster, easier installation with lower torque.
- Made in the U.S.A.
NOTE:This item uses a \#3 Philips Drive Bit.
| Brand: | Kimball Midwest Approved Vendor |
| Color: | Gray |
| Diameter: | No. 12 |
| Drill Point: | 4 |
| Drill Size: | 0.125 - 0.25 |
| Drive Recess: | Phillips |
| Finish: | StalGard |
| Head Style: | Flat Head |
| Length: | 2-1/4" |
| Material: | Steel |
| Measurement Type: | SAE |
| Thread Pitch: | 24 |
| Thread Size: | #12-24 |
| Thread Type: | Fine |
- SELF-DRILLING DESIGN - Eliminates pre-drilling for the fastest and easiest attachment of wood to steel.
- WOOD-TO-METAL - Plywood floor board to steel frames. Plywood roofboard to steel frames. 2x4 headers to steel frames. Plywood fascia to steel frames. Wood mansard roofing to steel frames.
- NON-WALKING DRILL POINT - Improves drilling performance while requiring less effort.
- REAMER WING DESIGN - Special “reamer wings” behind the point enlarge the hole in wood to prevent thread engagement during drilling, then shear off on contact with metal to allow full thread engagement for maximum strength.
- GRAY STALGARD - Durable multi-layer, corrosion-resistant coating engineered to provide optimal performance in demanding construction applications. Provides 1000+ hours of resistance with no red rust per ASTM B117. Was developed for use with ACQ-treated lumber with retention levels no higher than .25 PCF.
- LOWER TAPPING TORQUE - The lubricity of Gray StalGard allows faster, easier installation with lower torque.
- Made in the U.S.A.
NOTE:This item uses a \#3 Philips Drive Bit.
| Brand: | Kimball Midwest Approved Vendor |
| Color: | Gray |
| Diameter: | No. 12 |
| Drill Point: | 4 |
| Drill Size: | 0.125 - 0.25 |
| Drive Recess: | Phillips |
| Finish: | StalGard |
| Head Style: | Flat Head |
| Length: | 2-1/4" |
| Material: | Steel |
| Measurement Type: | SAE |
| Thread Pitch: | 24 |
| Thread Size: | #12-24 |
| Thread Type: | Fine |
Digital Catalog
View Catalog