K300 with K280 Hose & Fittings Medium Shop Setup

This Shop Setup contains a crimper, dies, 2 assortments and all required storage equipment.

K300-110 - K300 K-Series Hydraulic Crimper with 110 Volt Pump - Qty. 1

• K300 CRIMPER - 62 Tons of crimping force.
• HOSE CAPACITY - Up to 1-1/4" 2-wire, 1-1/4" 4-sprial and 1" 6-spiral hose.
• OPEN DESIGN - Provides excellent operator visibility.
• MICROMETER - Fully adjustable micrometer allows for a precise crimp.
• ADJUSTABLE RETRACTION STOP - Limits ram retraction to only the amount required to remove the hose and coupling, saving time on multiple crimps.
• AUTOMATIC SHUT-OFF - Stops when the pusher reaches the optimum stop position to help prevent over crimping.
• REMOVABLE PUSHER & DIES - Makes it easy to accurately place fittings in the die.
• PNEUMATIC SWITCH - Allows hand or foot operation.
• BASE MOUNTING HOLES - Allows the crimper to be bench and truck bed mounted.
• COMPARE TO WEATHERHEAD® T-420 MACHINE.
• MADE IN THE U.S.A.

NOTE: Weatherhead® is a registered trademark of Eaton.
Dies ordered separately.

K100-16 - 16mm Orange K-Series Die - Qty. 1

K100-19 - 19mm Green K-Series Die - Qty 1

K100-23 - 23mm Blue K-Series Die - Qty. 1

K100-31 - 31mm Yellow K-Series Die - Qty. 1

• For use with the K100 and K300 Series Hydraulic Crimpers

K100DD - Die Storage Drawer - Qty. 1

• CONVENIENT STORAGE - Protects and holds crimper tooling for easy access.
  Divided compartments store up to six dies for K100 and K300 hydraulic crimpers. The additional side compartment can be used to store other crimper accessories.
• SPACE-SAVING DESIGN - Crimper can be mounted directly to the top of the drawer, using the pre-drilled holes, saving space on work benches.
• HEAVY-DUTY CONSTRUCTION - 11 gauge powder-coated mild steel is tough and durable for long service life.
  Corners are welded and ground smooth.
• MADE IN THE U.S.A.

40-579-4 - 1/4" - 3/4" Kim-Krimp Pipe, JIC 37° & Face Seal Z Series Assortment - 69 Pieces

40-599-2 - 1/4"-3/4" K280 Hydraulic Hose Cabinet Assortment - 6 Pieces

630B - Bin Base - Qty. 1

Use with all Kimball Midwest Bins (K-M No.'s 612, 618, 619, 630, 631, 660, 661 and 662)

636B - Hydraulic Hose Cabinet Stand - Qty. 1

• Adjustable Base Stand - Closed - 35-3/4" Wide x 24-1/2" Deep
  Open - 61-1/8" Wide x 24-1/2" Deep

SPF9960 - Green Bin Tape - 150 Feet

SPF9963 - Yellow Bin Tape - 150 Feet

SPF9967 - Blue Bin Tape - 150 Feet

SPF9968 - Orange Bin Tape - 150 Feet