Large Hydraulic Adapters Add-On Shop Setup

This Shop Setup contains 12 assortments and all required storage equipment.

40-509 - Hydraulic O-Ring Assortment - 197 Pieces

• Contains O-Rings for use with split flange fittings, For-Seal fittings and straight thread fittings.
• 197 O-Rings in 24 sizes.

40-565 - Face-Seal Caps, Plugs O-Ring Assortment (1/4" - 1") - 96 Pieces

• TYPICAL APPLICATION: High pressure hydraulic, pneumatic and chemical processing.
• PRESSURE: Up to 6000 P.S.I. (1-1/4 and 1-1/2 maximum 4000 P.S.I.).
• SEALING METHOD: O-Ring.
• VIBRATION RATING: Excellent resistance.
• MATERIAL: Carbon Steel - 12L14.
• USED WITH: Steel tubing (tubing for brazing must be non-coated).
• ADVANTAGES: Tubing is brazed for permanent leakproof connection.
• CONFORMANCE: Meets SAE J1453.

40-565-2 - Face-Seal Male Connector Assortment (1/4" - 1") - 27 Pieces

• TYPICAL APPLICATION: High pressure hydraulic, pneumatic and chemical processing.
• PRESSURE: Up to 6000 P.S.I. (1-1/4 and 1-1/2 maximum 4000 P.S.I.).
• SEALING METHOD: O-Ring.
• VIBRATION RATING: Excellent resistance.
• MATERIAL: Carbon Steel - 12L14.
• USED WITH: Steel tubing (tubing for brazing must be non-coated).
• ADVANTAGES: Tubing is brazed for permanent leakproof connection.
• CONFORMANCE: Meets SAE J1453.

40-565-3 - Face-Seal Elbow Assortment (1/4" - 3/4") - 13 Pieces

• TYPICAL APPLICATION: High pressure hydraulic, pneumatic and chemical processing.
• PRESSURE: Up to 6000 P.S.I. (1-1/4 and 1-1/2 maximum 4000 P.S.I.).
• SEALING METHOD: O-Ring.
• VIBRATION RATING: Excellent resistance.
• MATERIAL: Carbon Steel - 12L14.
• USED WITH: Steel tubing (tubing for brazing must be non-coated).
• ADVANTAGES: Tubing is brazed for permanent leakproof connection.
• CONFORMANCE: Meets SAE J1453.

40-566 - Steel 37° JIC Cap & Plug Assortment (1/4" - 1") - 46 Pieces

• TYPICAL APPLICATION: Hydraulic, instrumentation and chemical processing systems.
• PRESSURE: Up to 10,000 P.S.I. depending on tube and fitting size.
• VIBRATION RATING: Good resistance. Vibration resistance decreases with increase in tube size. Use two piece design when greater vibration resistance is required.
• TEMPERATURE RANGE: -65°F to +400°F.
• MATERIAL: Carbon Steel - AISI/SAE 12L14.
• PLATING: Zinc, yellow dichromate finish.
• USED WITH: Copper, brass, steel, aluminum and other tubing that can be flared.
• ADVANTAGES: Zinc plate. Choice of 2 or 3 piece design. Broad selection of styles and sizes. Interchangeable with all sources.
• CONFORMANCE: Meets ASA, ASME, SAE and MS specifications and standards.

40-566-1 - Steel 37° JIC Male Connector Assortment (1/8" - 3/4") - 34 Pieces

• TYPICAL APPLICATION: Hydraulic, instrumentation and chemical processing systems.
• PRESSURE: Up to 10,000 P.S.I. depending on tube and fitting size.
• VIBRATION RATING: Good resistance. Vibration resistance decreases with increase in tube size. Use two piece design when greater vibration resistance is required.
• TEMPERATURE RANGE: -65°F to +400°F.
• MATERIAL: Carbon Steel - AISI/SAE 12L14.
• PLATING: Zinc, yellow dichromate finish.
• USED WITH: Copper, brass, steel, aluminum and other tubing that can be flared.
• ADVANTAGES: Zinc plate. Choice of 2 or 3 piece design. Broad selection of styles and sizes. Interchangeable with all sources.
• CONFORMANCE: Meets ASA, ASME, SAE and MS specifications and standards.

40-566-2 - Steel 37° JIC 90° Male Elbow Assortment (1/8" - 3/4") - 23 Pieces

• TYPICAL APPLICATION: Hydraulic, instrumentation and chemical processing systems.
• PRESSURE: Up to 10,000 P.S.I. depending on tube and fitting size.
• VIBRATION RATING: Good resistance. Vibration resistance decreases with increase in tube size. Use two piece design when greater vibration resistance is required.
• TEMPERATURE RANGE: -65°F to +400°F.
• MATERIAL: Carbon Steel - AISI/SAE 12L14.
• PLATING: Zinc, yellow dichromate finish.
• USED WITH: Copper, brass, steel, aluminum and other tubing that can be flared.
• ADVANTAGES: Zinc plate. Choice of 2 or 3 piece design. Broad selection of styles and sizes. Interchangeable with all sources.
• CONFORMANCE: Meets ASA, ASME, SAE and MS specifications and standards.

40-566-3 - Steel 37° JIC Female Connector & 45° Male Elbow Assortment (1/8" - 3/4") - 31 Pieces

• TYPICAL APPLICATION: Hydraulic, instrumentation and chemical processing systems.
• PRESSURE: Up to 10,000 P.S.I. depending on tube and fitting size.
• VIBRATION RATING: Good resistance. Vibration resistance decreases with increase in tube size. Use two piece design when greater vibration resistance is required.
• TEMPERATURE RANGE: -65°F to +400°F.
• MATERIAL: Carbon Steel - AISI/SAE 12L14.
• PLATING: Zinc, yellow dichromate finish.
• USED WITH: Copper, brass, steel, aluminum and other tubing that can be flared.
• ADVANTAGES: Zinc plate. Choice of 2 or 3 piece design. Broad selection of styles and sizes. Interchangeable with all sources.
• CONFORMANCE: Meets ASA, ASME, SAE and MS specifications and standards.

40-566-5 - Steel 37° JIC Straight Thread O-Ring Connector Assortment (1/4" - 3/4") - 35 Pieces

• TYPICAL APPLICATION: Hydraulic, instrumentation and chemical processing systems.
• PRESSURE: Up to 10,000 P.S.I. depending on tube and fitting size.
• VIBRATION RATING: Good resistance. Vibration resistance decreases with increase in tube size. Use two piece design when greater vibration resistance is required.
• TEMPERATURE RANGE: -65°F to +400°F.
• MATERIAL: Carbon Steel - AISI/SAE 12L14.
• PLATING: Zinc, yellow dichromate finish.
• USED WITH: Copper, brass, steel, aluminum and other tubing that can be flared.
• ADVANTAGES: Zinc plate. Choice of 2 or 3 piece design. Broad selection of styles and sizes. Interchangeable with all sources.
• CONFORMANCE: Meets ASA, ASME, SAE and MS specifications and standards.

40-569-1 - Steel Caps, Plugs & Couplers Assortment (1/8" - 3/4") - 82 Pieces

• TYPICAL APPLICATION: Grease, instrumentation and most hydraulic systems.
• PRESSURE: Up to 3000 P.S.I. depending on pipe size.
• VIBRATION RATING: Fair resistance.
• TEMPERATURE RANGE: -65°F to +400°F.
• MATERIAL: Carbon Steel - AISI/SAE 12L14
• USED WITH: Brass, bronze and iron pipe.
• ADVANTAGES: Dryseal pipe threads (NPTF), zinc plate, compact size, broad selection of styles and sizes.
• CONFORMANCE: Meets SAE specifications.

40-569-3 - Steel Elbows & Adapters Assortment (1/8" - 3/4") - 26 Pieces

• TYPICAL APPLICATION: Grease, instrumentation and most hydraulic systems.
• PRESSURE: Up to 3000 P.S.I. depending on pipe size.
• VIBRATION RATING: Fair resistance.
• TEMPERATURE RANGE: -65°F to +400°F.
• MATERIAL: Carbon Steel - AISI/SAE 12L14
• USED WITH: Brass, bronze and iron pipe.
• ADVANTAGES: Dryseal pipe threads (NPTF), zinc plate, compact size, broad selection of styles and sizes.
• CONFORMANCE: Meets SAE specifications.

40-591-1 - Service Plug Assortment - 8 Pieces

• PREVENTS SPILLS - Plug hydraulic hose and tubing during service to prevent fluids from leaking.
• PROTECTS Systems - Prevents contaminants from entering the system during servicing.
• UNIVERSAL FIT - Covers most hose diameters, fitting sizes and ports.
• ECONOMICAL - Reusable design offers superior value.
• DURABLE - Resistant to most oils and shop chemicals.
• SIMPLE TO USE - Insert, push, then push and twist in the same action. Twist and pull to remove.
• TEMPERATURE RANGE: -15ºF through 195ºF.

628R - Space Saving Depth Large Drawer Roller Rack - Qty. 3

• SPACE-SAVING DEPTH - At only 12-1/2" deep, the rack installs easily in confined work areas, and lines up better with standard 40 hole bins to provide a seamless look to installations.
  NOTE: The 644R rack is 16-3/4" deep.
• BALL BEARING SLIDES - Provide smooth extension and
  retraction, and long service life.
• BUILT-IN POSITIVE STOPS - Hold the drawer in place to help
  prevent accidental sliding forward. A firm (but not difficult) pull will allow the drawer to be moved forward easily.
• MADE IN THE U.S.A..

729 - Space Saving Depth Rack Base Stand - Qty. 2

• Use with 628R racks.
• 20-5/8 wide x 12-5/8 deep x 12" high