This Shop Setup contains 4 assortments and all required storage equipment.

40-565 - Face-Seal Caps, Plugs O-Ring Assortment (1/4" - 1") - 96 Pieces

• TYPICAL APPLICATION: High pressure hydraulic, pneumatic and chemical processing.
• PRESSURE: Up to 6000 P.S.I. (1-1/4 and 1-1/2 maximum 4000 P.S.I.).
• SEALING METHOD: O-Ring.
• VIBRATION RATING: Excellent resistance.
• MATERIAL: Carbon Steel - 12L14.
• USED WITH: Steel tubing (tubing for brazing must be non-coated).
• ADVANTAGES: Tubing is brazed for permanent leakproof connection.
• CONFORMANCE: Meets SAE J1453.

40-565-2 - Face-Seal Male Connector Assortment (1/4" - 1") - 27 Pieces

• TYPICAL APPLICATION: High pressure hydraulic, pneumatic and chemical processing.
• PRESSURE: Up to 6000 P.S.I. (1-1/4 and 1-1/2 maximum 4000 P.S.I.).
• SEALING METHOD: O-Ring.
• VIBRATION RATING: Excellent resistance.
• MATERIAL: Carbon Steel - 12L14.
• USED WITH: Steel tubing (tubing for brazing must be non-coated).
• ADVANTAGES: Tubing is brazed for permanent leakproof connection.
• CONFORMANCE: Meets SAE J1453.

40-565-3 - Face-Seal Elbow Assortment (1/4" - 3/4") - 13 Pieces

• TYPICAL APPLICATION: High pressure hydraulic, pneumatic and chemical processing.
• PRESSURE: Up to 6000 P.S.I. (1-1/4 and 1-1/2 maximum 4000 P.S.I.).
• SEALING METHOD: O-Ring.
• VIBRATION RATING: Excellent resistance.
• MATERIAL: Carbon Steel - 12L14.
• USED WITH: Steel tubing (tubing for brazing must be non-coated).
• ADVANTAGES: Tubing is brazed for permanent leakproof connection.
• CONFORMANCE: Meets SAE J1453.

40-565-4 - Face-Seal Union and O-Ring Assortment (1/4" - 1") - 310 Pieces

• TYPICAL APPLICATION: High pressure hydraulic, pneumatic and chemical processing.
• PRESSURE: Up to 6000 P.S.I. (1-1/4 and 1-1/2 maximum 4000 P.S.I.).
• SEALING METHOD: O-Ring.
• VIBRATION RATING: Excellent resistance.
• MATERIAL: Carbon Steel - 12L14.
• USED WITH: Steel tubing (tubing for brazing must be non-coated).
• ADVANTAGES: Tubing is brazed for permanent leakproof connection.
• CONFORMANCE: Meets SAE J1453.

628R - Space Saving Depth Large Drawer Roller Rack - Qty. 1

• SPACE-SAVING DEPTH - At only 12-1/2" deep, the rack installs easily in confined work areas, and lines up better with standard 40 hole bins to provide a seamless look to installations.
  NOTE: The 644R rack is 16-3/4" deep.
• BALL BEARING SLIDES - Provide smooth extension and
  retraction, and long service life.
• BUILT-IN POSITIVE STOPS - Hold the drawer in place to help
  prevent accidental sliding forward. A firm (but not difficult) pull will allow the drawer to be moved forward easily.
• MADE IN THE U.S.A..

729 - Space Saving Depth Rack Base Stand - Qty. 1

• Use with 628R racks.
• 20-5/8 wide x 12-5/8 deep x 12" high