Master Hose Protection Add-On Shop Setup

This Shop Setup contains 7 assortments, 4 spools of hose protection and all required storage equipment.

40-260-8 - Black Nylon Cable Tie Dispenser Rack Assortment - 400 Pieces

• Nylon 6/6 construction gives light weight, high strength and wide temperature range.
• One piece molded design provides maximum durability.
• Bent-tip tapered tails give easy insertion and fast bundling.
• Uniform serrations give easy “pull-through” to the wire bundle.
• Smooth, rounded ends let ties slip easily around and under cables and harnesses.
• Operating temperature range: -40° to 185°F.
• Meets all military specifications, QPL listed and U.L. recognized.
• Available in natural white and U.V. stabilized black for long life exposed to weather and sunlight.

40-265-1 - Insulated Steel Clamp Assortment (1/4" - 2") - 84 Pieces

40-265-2 - Insulated Steel Clamp Assortment (3/16" - 1-1/4") - 95 Pieces

• NEOPRENE CUSHION INSULATION - Wrapped design provides a thicker cushion for superior wiring/hose/tube protection and vibration dampening. Maximum operating temperature 212°F (100°C).
• YELLOW ZINC FINISH - Provides superior corrosion resistance for demanding applications.
• VERSATILE - Heavy duty clamps are ideal for all applications with wiring, cables, loom, tubing, hose, conduit, etc.
• EXTREME DURABILITY - Heavy gauge steel with wrapped neoprene rubber insulation withstands tough applications.
• STANDARD PATTERN - 1/2" width band with 1/4" bolt hole.
• MADE IN THE U.S.A.

40-515-9 - Constant Torque Hose Clamp Assortment (#300 - #500) - 14 Pieces

• ELIMINATES COLD-FLOW LEAKAGE – Prevents leaks caused by temperature changes.
• AUTO ADJUSTING DIAMETER – Clamp automatically increases or decreases its diameter due to changes in operation or environment temperatures.
• CONSTANT TORQUE – Belleville spring washer mechanism provides a reliable and accurate constant tight fit without needed adjustments.
• DIFFICULT APPLICATIONS – Ideal where clamps are difficult to get at for re-tightening and potential leakage in the connection may occur.
• HEAVY EQUIPMENT – Recommended for bus, truck and heavy-duty equipment air intake & coolant connections.
• CORROSION RESISTANT – Heavy-duty stainless steel housing, 5/8" stainless steel band and 3/8" hex drive screw.
• MADE IN THE U.S.A.

40-516-1 - Heavy-Duty Standard Hose Clamp Assortment (#4 - #36) - 100 Pieces

40-517-1 - Heavy-Duty Standard Hose Clamp Assortment (#40 - #56) - 50 Pieces

• HEAVY-DUTY BREEZE CLAMP DESIGN - Heavy-duty four piece Quadra-Lock™ construction makes these clamps the ideal choice for demanding applications. Arcial slots in the bands give added strength against stripping.
• QUADRA-LOCK™ CONSTRUCTION - Housing is clinched at four points for extra strength and stability; clamp resists twisting and lifting during installation.
• EASY INSTALLATION - Quickly install clamps using a slotted screwdriver, nut driver or ratchet/socket wrench.
• STREAMLINED DESIGN - Low profile design is ideal for tight fitting enclosures; ensures that the clamp will not get hung up on surrounding components.
• WIDE CLAMPING SURFACE - Wide band creates higher sealing pressure with lower applied installed torques.
• CORROSION RESISTANT DESIGN - Clinched design means there are no spot welds to rust, corrode or rupture.
• STAINLESS STEEL COMPONENTS - All hose clamps feature a stainless steel band and housing for increased performance.
• 1/2 wide stainless steel band.
• 5/16 hex head zinc plated screw.
• Arcial slots and buttress threads for smooth, positive action.
• Full 360° circle.
• Meets or exceeds SAE specifications.
• MADE IN THE U.S.A.

40-527-1 - Black Hose Protector Assortment - 47 Pieces

• ABRASION PROTECTION - Protects hoses, lines and cables from wear and failure due to rubbing, friction, impact or abrasion.
• PREVENTS COSTLY DAMAGE & REPAIRS - Protects against expensive hose and wire replacement and helps prevent equipment downtime.
  Helps protect against fires caused by failed hydraulic and electrical systems.
• TEMPERATURE & CHEMICAL RESISTANT - Wide operating temperature range, from -40°F to 430°F. Impervious to solvents including oil, grease, gasoline and fuels.
• EASY & RELIABLE INSTALLATION - Can be installed without disconnecting hydraulic lines; cable ties grip lines tightly to prevent sliding.
• HIGH VISIBILITY CONSTRUCTION - Yellow protectors clearly identify protected areas.
• VERSATILE - For use on hydraulic lines, fuel and oil lines, air brake hose, wiring harnesses and battery cables, heater hoses and air conditioning lines. 4" protectors are ideal for electrical wiring and cables. 6" and 8" lengths protect hoses 1/2" I.D. and up. 10" and 12" lengths protect bundles and harnesses.
• MADE IN THE U.S.A.

52-1243 - 2" Abrasion Sleeve - 25 Feet

• HEAVY DUTY PROTECTION - Tightly woven ballistic nylon construction provides high abrasion resistance combined with superior flexibility, making it ideal in demanding maintenance applications.
• FAST & EASY INSTALLATION - 1" wide hook and loop closure provides fast and easy installation on new or existing hose, wire, cable or chain assemblies.
• INCREASED SAFETY - In the event of hydraulic hose rupture, the sleeve helps contain high pressure fluid to help keep it from becoming a danger to personnel.
• TOUGH & DURABLE - Weather, moisture, UV and chemical resistant protection against abrasion and sharp objects. Use on chains to help prevent marring of adjacent equipment. Sleeving stays in place - will not ride up or down.
• SECURE BUNDLING - Keeps multiple hose and wire assemblies grouped together in a neat bundle.
• SPECIFICATIONS: Meets MSHA and RoHS standards
  Melting Point: 410°F
  Maximum Continuous Temperature: 200°F
  Minimum Continuous Temperature: -60°F
  Tensile Strength: 2,256 lbs.
• RECOMMENDED CUTTING - Use a hot knife or flame seal the cut ends to prevent unravelling.
• MADE IN THE U.S.A.

52-608 - 1/2" Hydraulic Hose Spiral Protective Wrap - 100 Feet

52-610 - 3/4" Hydraulic Hose Spiral Protective Wrap - 100 Feet

52-611 - 1" Hydraulic Hose Spiral Protective Wrap - 100 Feet

• ABRASION PROTECTION - Protects hydraulic lines from wear and failure due to rubbing, friction, impact orabrasion.
• BUNDLES MULTIPLE HOSES - Keeps multiple hoses grouped together in a neat bundle while providing protection. Will bundle groups of hoses several times larger than the wrap’s diameter. Hoses can exit the bundle at any point.
• EASY & RELIABLE INSTALLATION - Can be installed without disconnecting any hydraulic lines; grips lines tightly to prevent sliding or overlapping.
• BLACK POLYETHYLENE CONSTRUCTION - Protects hoses from damage while providing flexibility, UV resistance and light weight.
• MADE IN THE U.S.A.

628R - Space Saving Depth Large Drawer Roller Rack - Qty. 1

• SPACE-SAVING DEPTH - At only 12-1/2" deep, the rack installs easily in confined work areas, and lines up better with standard 40 hole bins to provide a seamless look to installations.
  NOTE: The 644R rack is 16-3/4" deep.
• BALL BEARING SLIDES - Provide smooth extension and
  retraction, and long service life.
• BUILT-IN POSITIVE STOPS - Hold the drawer in place to help
  prevent accidental sliding forward. A firm (but not difficult) pull will allow the drawer to be moved forward easily.
• MADE IN THE U.S.A..

729 - Space Saving Depth Rack Base Stand - Qty. 1

• Use with 628R racks.
• 20-5/8 wide x 12-5/8 deep x 12" high