• UNIQUE PUSH-IN DESIGN - No crimping, twisting or turning to install.
• FAST AND EASY INSTALLATION - Just strip the wire (3/8-1/2 length) and push into the connector.
  Requires little force and effort to install, reducing downtime.
• NO-TWIST INSERTION - Helps eliminate failure due to repetitive motion fatigue.
• VERSATILE - Connects both stranded and solid copper wire.
• WIDE WIRE RANGE - Accepts 20-12 AWG solid wire and 16-12 AWG stranded wire.
• CLEAR POLYCARBONATE HOUSING - Allows quick visual inspection of the connection for maximum reliability.
• INDIVIDUAL WIRE COMPARTMENTS - Holds each wire individually for a strong connection.
• GROUND RATING - Eliminates the need for a special ground connector.
• UL LISTED AND CSA CERTIFIED - UL listed connectors fully insulate wires to ensure safe operations.
• SPECIFICATIONS:
  Rated for 600V (1000V for fixtures and signs)
  RoHS Compliant
  Temperature Rating: 221°F
  UL Designation: 486C
  Maximum Amperage: 20A
• INSTALLATION INSTRUCTIONS
  1. Wiring must comply with all applicable electrical codes.
  2. Turn OFF power before removing or installing connectors.
  3. Strip wires 1/2". Completely bare conductors.
  4. Grip wire firmly and push conductor into open port. Use only one conductor per port.
  5. Verify conductor is fully inserted to the back of the connector.
  6. Connector is reusable on solid wires of the same wire gauge or larger. If reusing connector, cut and re-strip conductors.
  7. In order to remove a wire, pull and twist the wire back and forth.

NOTE: Do not re-use connectors on stranded wire.
NOTE: Contact with electricity can cause electrical fires, personal injury, or death. Shut off power to the circuit before using this product and consult local building codes to determine installation requirements.