Standard Fluid Flow Shop Setup

This Shop Setup contains 12 assortments, 3 reels of tubing, a tubing cutter and all related storage equipment.

40-490 - 1/16" - 1/8" Buna-N 90 O-Ring Assortment - 235 Pieces

• 90 Durometer for high pressure applications.
• 90 Durometer recognized by yellow stripe.
• Manufactured from nitrile rubber.
• Temperature range: -65° to 300°F.
• Resists wide range of solvents, oils & fluids.

40-515-9 - \#300 - \#500 Constant Torque Hose Clamp Assortment - 14 Pieces

• ELIMINATES COLD-FLOW LEAKAGE – Prevents leaks caused by temperature changes.
• AUTO ADJUSTING DIAMETER – Clamp automatically increases or decreases its diameter due to changes in operation or environment temperatures.
• CONSTANT TORQUE – Belleville spring washer mechanism provides a reliable and accurate constant tight fit without needed adjustments.
• DIFFICULT APPLICATIONS – Ideal where clamps are difficult to get at for re-tightening and potential leakage in the connection may occur.
• HEAVY EQUIPMENT – Recommended for bus, truck and heavy-duty equipment air intake & coolant connections.
• CORROSION RESISTANT – Heavy-duty stainless steel housing, 5/8" stainless steel band and 3/8" hex drive screw.
• MADE IN THE U.S.A.

40-516-1 - \#4 - \#36 Heavy-Duty Hose Clamp Assortment - 100 Pieces

• HEAVY-DUTY BREEZE CLAMP DESIGN - Heavy-duty four piece Quadra-Lock™ construction makes these clamps the ideal choice for demanding applications. Arcial slots in the bands give added strength against stripping.
• QUADRA-LOCK™ CONSTRUCTION - Housing is clinched at four points for extra strength and stability; clamp resists twisting and lifting during installation.
• EASY INSTALLATION - Quickly install clamps using a slotted screwdriver, nut driver or ratchet/socket wrench.
• STREAMLINED DESIGN - Low profile design is ideal for tight fitting enclosures; ensures that the clamp will not get hung up on surrounding components.
• WIDE CLAMPING SURFACE - Wide band creates higher sealing pressure with lower applied installed torques.
• CORROSION RESISTANT DESIGN - Clinched design means there are no spot welds to rust, corrode or rupture.
• STAINLESS STEEL COMPONENTS - All hose clamps feature a stainless steel band and housing for increased performance.
• 1/2 wide stainless steel band.
• 5/16 hex head zinc plated screw.
• Arcial slots and buttress threads for smooth, positive action.
• Full 360° circle.
• Meets or exceeds SAE specifications.
• MADE IN THE U.S.A.

40-518-3 - \#4 - \#32 Heavy-Duty Stainless Steel Hose Clamp Assortment - 60 Pieces

• HEAVY-DUTY BREEZE CLAMP DESIGN - Heavy-duty four piece Quadra-Lock™ construction makes these clamps the ideal choice for demanding applications. Arcial slots in the bands give added strength against stripping.
• QUADRA-LOCK™ CONSTRUCTION - Housing is clinched at four points for extra strength and stability; clamp resists twisting and lifting during installation.
• EASY INSTALLATION - Quickly install clamps using a slotted screwdriver, nut driver or ratchet/socket wrench.
• STREAMLINED DESIGN - Low profile design is ideal for tight fitting enclosures; ensures that the clamp will not get hung up on surrounding components.
• WIDE CLAMPING SURFACE - Wide band creates higher sealing pressure with lower applied installed torques.
• CORROSION RESISTANT DESIGN - Clinched design means there are no spot welds to rust, corrode or rupture.
• STAINLESS STEEL COMPONENTS - All hose clamps feature a stainless steel band and housing for increased performance.
• STAINLESS STEEL SERIES – Provides high strength and superior corrosion resistance for demanding applications.
• 1/2 wide stainless steel band.
• 300 series stainless steel band, housing and 5/16 hex head screw.
• Interlocked construction gives maximum strength & durability.
• Arcial slots and buttress threads for smooth, positive action.
• Full 360° circle.
• Meets or exceeds SAE specifications.
• MADE IN THE U.S.A.

40-522 - Grease Fitting Assortment - 320 Pieces

• Spherical base forms leak-proof seal.
• Steel Fittings: Bodies made of AISI 12L14 steel, carbo-nitrated and case hardened.
• Fittings have 2 notches on the edge of the hex for easy identification.
• Concave head for easy disconnect.
• Completely universal.
• Ball in tip to keep out dirt.
• Enlarged inner passage admits more lubricant.
• Balanced action spring retracts easily to allow maximum lube flow and holds ball firmly in sealing position.

40-552-2 - 1/8" - 1/2" Brass Plugs, Caps, Bushings & Couplers Assortment - 68 Pieces

40-552-3 - 1/8" - 1/2" Brass Elbows & Tees Assortment - 57 Pieces

40-552-4 - 1/8" - 1/2" Brass Adapters & Nipples Assortment - 69 Pieces

• TYPICAL APPLICATION: Grease, fuels, LP and natural gas, refrigeration, instrumentation, and hydraulic systems.
• PRESSURE: Up to 1200 P.S.I. depending on tube size.
• TEMPERATURE: -65°F to +250°F.
• VIBRATION RATING: Fair resistance - use long nut when greater vibration resistance is needed.
• USED WITH: Brass, bronze and iron pipe.

40-554 - Brass Compression Tube Fittings Assortment - 192 Pieces

• TYPICAL APPLICATION: Instrumentation, hydraulic, and pneumatic systems.
• PRESSURE: Up to 2000 P.S.I. depending on tube size.
• SEALING METHOD: 3-piece compression.
• TEMPERATURE: -65° to +250°F.
• VIBRATION RATING: Fair resistance – use long nut when greater vibration resistance is needed.
• USED WITH: Aluminum, copper or plastic tubing.
• CONTAINS: Compression sleeves, nuts, unions, male connectors and male 90° elbows.

40-559-6 - Black Polyurethane Tubing Assortment - 3 Reels

• Polyurethane construction is extremely tough, lightweight, flexible, and durable.
• Up to 10 times the life of Nylon, PVC , or Polyethylene tubing.
• The most abrasion resistant tubing available.
• Retains flexibility even in subzero temperatures.
• Resists lubricating oils and grease.
• Exceptional durability reduces operating costs, and downtime replacing worn or damaged tubing.
• Extremely kink resistant and crush resistant.
• Temperature range: -68°F to +140°F.
• Resists a wide range of chemicals.
• Use with Compression Fittings, Prestolok® Fittings, Push-Connect Fittings, and Super Speedfit® Fittings.
• NSF Approved for potable water.
• Ideal for use with pneumatic tools, instrumentation, lube lines, chemical transfer, controls, and other demanding applications.

40-562-1 - Low Pressure Hose Ends Assortment - 70 Pieces

• BARBED HOSE FITTINGS - Ideal for use in low pressure applications for air, water and oil.
• COMPATABLE HOSES - H105, H115.
• 316 STAINLESS STEEL - Provides excellent corrosion resistance in harsh environments and applications involving corrosive chemicals or liquids.
• SPECIFICATIONS:
  Maximum Pressure: 300 P.S.I.
  Material: 316 Stainless Steel
  NPT Threads: Conform to ASME B1.20.1

40-563 - Kimposite Push-To-Connect Fitting Master Assortment - 117 Pieces

• SUPERIOR VALUE - A cost-effective solution for flow control valves.
• TYPICAL APPLICATIONS - Used to control the speed of pneumatic cylinders.
• USED WITH - PU340, PT230, TP160 and PT240 polyethylene tubing.
• SPECIFICATIONS:
  Body: Polybutylene Terephthalate Resin
  Threads: Nickel-plated brass
  Gripping Ring: Stainless steel
  Release Ring: Acetal plastic
  Working pressure: 150 P.S.I.
  Vacuum Rating: 29.5" Hg
  Temp Range: 32°F to 140°F

40-566 - SAE JIC 37° Cap & Plug Assortment - 46 Pieces

• TYPICAL APPLICATION: Hydraulic, instrumentation and chemical processing systems.
• PRESSURE: Up to 10,000 P.S.I. depending on tube and fitting size.
• VIBRATION RATING: Good resistance. Vibration resistance decreases with increase in tube size. Use two piece design when greater vibration resistance is required.
• TEMPERATURE RANGE: -65°F to +400°F.
• MATERIAL: Carbon Steel - AISI/SAE 12L14.
• PLATING: Zinc, yellow dichromate finish.
• USED WITH: Copper, brass, steel, aluminum and other tubing that can be flared.
• ADVANTAGES: Zinc plate. Choice of 2 or 3 piece design. Broad selection of styles and sizes. Interchangeable with all sources.
• CONFORMANCE: Meets ASA, ASME, SAE and MS specifications and standards.

54-839 - Plastic Tubing & Hose Cutter - Qty. 1

• QUICK & CLEAN SQUARE CUTS - Enables a clean cut that allows for fast and easy installation of tubing into push-to-connect fittings. Eliminates the need to dress or de-burr the tubing after cutting.
• DURABLE CONSTRUCTION - Glass-filled nylon body with steel blade provides a lightweight, durable cutter for accurate and repeatable cuts.
• COMPACT TUBING CUTTER - Allows easy storage in a tool box or service truck kits.
• CAPACITY - Cuts 1/8" through 3/4" O.D. tubing or hose.

628R - Space Saving Large Drawer Roller Rack - Qty. 3

• SPACE-SAVING DEPTH - At only 12-1/2" deep, the rack installs easily in confined work areas, and lines up better with standard 40 hole bins to provide a seamless look to installations.
• BALL BEARING SLIDES - Provide smooth extension and
  retraction, and long service life.
• BUILT-IN POSITIVE STOPS - Hold the drawer in place to help
  prevent accidental sliding forward. A firm (but not difficult) pull will allow the drawer to be moved forward easily.
• MADE IN THE U.S.A..

680 - 20 Compartment Drawer - Qty. 1

685 - Adjustable Drawer - Qty. 1

• Large Drawer
• For use in 628R, 646, 645, 613 or 613R drawer racks.

729 - Space Saving Depth Rack Base Stand - Qty. 2

• Use with 628R racks.
• 20-5/8 wide x 12-5/8 deep x 12" high

762 - Angled Rack Topper - Qty. 1

• KEEPS SHOP AREAS NEAT & ORGANIZED - Angled topper installs on top of the rack to prevent clutter from accumulating.
• EASY TO INSTALL - The three-piece design is easy to install quickly.
  The ends of the topper are separate pieces to allow easy access to the fasteners attaching the topper to the drawer rack.
  After the topper is secured to the rack, the ends install quickly with three screws per side for a finished appearance.
• DURABLE CONSTRUCTION - Powder-coated steel construction is tough and durable for long service life.
• USE WITH 628R DRAWER RACK
• MADE IN THE U.S.A.