Non-running gel eliminates runs, drips, and waste. Available in 6mL and 50mL tubes, ideal for locking fasteners from 1/4" to 3/4" diameter. Versatile for threaded and press-fit assemblies, adds up to 3000 P.S.I. shear strength. Wide temperature range: -65°F to 300°F. Applications include valve covers, water pumps, and more.

ELIMINATES LOCK NUTS AND LOCK WASHERS, turning ordinary fasteners into vibration-proof assemblies. PENETRATING FORMULA allows application before or after assembly, ideal for problem areas. POWERFUL CAPILLARY ACTION ensures reliable threadlocking. SEALS THREADS to prevent corrosion and fills porosity in welds and castings. High strength green formula performs effectively.

Low strength formula, comparable to LOCTITE 222, provides 30 ft. lbs. locking force on a 3/8-16 oily fastener. Designed for precision metal fasteners under 3/4", ideal for adjustment set screws and other fasteners requiring easy disassembly. Temperature range: -65°F to 300°F. Prevents thread corrosion damage. Removable with regular hand tools.

High Strength Red Threadlocker with NON-RUNNING FORMULA. Provides over 160 ft. lbs. locking force on a 3/8-16 oily fastener. Performs from -65°F to +400°F. Suitable for fasteners up to 1-1/2” in diameter. Designed for permanent locking, may require heat to dissemble. Adds up to 3000 P.S.I. shear strength for superior hold.

Purple anaerobic gel sealant optimized for hydraulic and pneumatic fittings. High-performance sealing and locking for metal fittings, sealing pressures up to 10,000 P.S.I. Non-running gel prevents drips in vertical applications. Temperature range of -65°F to 300°F. Ideal for pipe, flared, and compression fittings. MADE IN THE U.S.A.

MAINTENANCE GRADE THREADLOCKER bonds to contaminated threaded fasteners, providing reliable holding strength equivalent to conventional threadlockers on clean fasteners. This MEDIUM STRENGTH BLUE THREADLOCKER is removable with hand tools, seals threads to prevent corrosion, and eliminates the need for lock nuts. WIDE TEMPERATURE RANGE: -65°F to 300°F. Typical applications include valve covers, water pumps, and any fastener subject to vibration.

Economical SINGLE USE APPLICATOR designed for accurate material cost calculation. MINI BULLET DISPENSER excellent for tight areas. WIDE TEMPERATURE RANGE: -65°F to 300°F. Medium strength formula provides 60 ft. lbs. locking force on 3/8-16 oily fasteners. Ideal for 1/4" to 3/4" diameter threaded fasteners. Seals threads, prevents corrosion, and removable with hand tools.

Comparable to Loctite 242 - Blue All-Purpose Threadlocker. Medium strength formula provides 60 ft. lbs. locking force on a 3/8-16 oily fastener. Ideal for threaded fasteners from 1/4" to 3/4" diameters. Eliminates the need for lock nuts and lock washers. Seals threads to prevent corrosion damage. Temperature range: -65°F to 300°F. Removable with regular hand tools. Applications include valve covers, water pumps, oil pans, drive shafts, gear boxes, conveyor rollers, and carburetor studs.

Economical SINGLE USE APPLICATOR allows accurate calculation of material costs. MINI BULLET DISPENSER excels in tight areas. WIDE TEMPERATURE RANGE: -65°F to 300°F. High strength formula provides 160 ft. lbs. locking force on 3/8-16 oily fasteners. Ideal for fasteners up to 1" diameter, adding up to 3,000 P.S.I. shear strength. Applications include cylinder block studs, ring gear bolts, and automotive suspension bolts.

High strength formula comparable to Loctite 271 - Red Thread locker. Provides 160 ft. lbs. locking force on a 3/8-16 oily fastener. Locks fasteners up to 1" diameter under severe vibration and shock. Adds up to 3000 P.S.I. shear strength. Temperature range: -65°F to 300°F. Applications include cylinder block studs, ring gear bolts, and automotive suspension bolts.

PRIMERLESS FORMULA allows use on aluminum, steel, plated fasteners, stainless steel, and special alloys. PERMANENT LOCKING secures large fasteners up to 1" diameter against shock and vibration. OIL TOLERANT performance reduces cleaning needs. Specifications include Max Gap Fill: 0.007", Break Away Torque: 200 - 350 In/Lbs, Temp. Rating: -60 to 360° F. MADE IN THE U.S.A.

This product speeds the cure of Loctite thread lockers by 50% and also serves as a general-purpose cleaning solvent for parts and surfaces. It is recommended for use in cold weather to expedite assembly.

Specially formulated for use on fasteners that are already assembled, this product should be applied after assembly. It wicks in to penetrate threads and fills gaps up to .005", securing set screws and other adjustable assemblies after settings are complete. It has a temperature range of -65°F to 300°F.

Medium strength BLUE formula. Ideal for threaded fasteners from 1/4" to 3/4" diameters. Eliminates the need for lock nuts and lock washers. Turns ordinary fasteners into vibration and shock-proof assemblies. Seals threads to prevent corrosion damage. Meets MIL-A-46050C, Type II, Class 3. Removable with regular hand tools. Temperature range: -60°F to 205°F. Applications include valve covers, pumps, oil pans, drive shafts, gear boxes, conveyor rollers, and carburetor studs.

High strength RED formula. Designed for locking fasteners up thru 1" diameter where severe vibration and shock is encountered, providing a tamperproof seal for difficult removal. Ideal for threaded and press fit assemblies, adding up to 2500 P.S.I. shear strength. Meets MIL-A-46050C, Type II, Class 2. Temperature range: -60°F to 205°F. Applications include cylinder block studs, ring gear bolts, and automotive suspension bolts.

Convenient and compact, designed for easy application by simply rubbing on threads. Provides up to 60 ft. lbs. locking force on a 3/8-16 fastener. Ideal for threaded fasteners from 1/4" to 3/4" diameters. Temperature range: -65°F to 300°F. Prevents rust and corrosion while sealing threads. Removable with regular hand tools.

Convenient size fits tool boxes or pockets. Faster application by rubbing on threads. No leaks or spills. Keeps work areas clean. Exact performance as original Loctite formulas. Ideal for overhead use. Large sticks offer more applications than liquid thread lockers. Comparable to Loctite 271 with up to 160 ft. lbs. locking force on 3/8-16 fasteners. Suitable for fasteners up to 1" diameter, resisting extreme vibration. Prevents rust and corrosion, sealing threads. Temperature range: -65°F to 300°F.

NO MESS THREADLOCKER in MEDIUM STRENGTH BLUE offers secure threaded assemblies without spills. Designed for easy application, this tape provides consistent strength on various metal substrates, usable immediately or days later. Ideal for assemblies requiring hand tool removal, ensuring reliable performance without the mess of conventional thread lockers.

Kit includes 1 stick each of 248 Threadlocker (Medium Strength) 19 Gram, 268 Threadlocker (High Strength) 19 Gram, PST 561 Pipe Sealant 19 Gram, C5-A Copper Anti-Seize 20 Gram, and Silver Grade Anti-Seize 20 Gram. Designed for various applications, offering medium to high strength solutions and effective sealing and anti-seize properties.

Medium strength formula provides 60 ft. lbs. locking force on a 3/8-16 oily fastener. Ideal for threaded fasteners from 1/4" to 3/4" diameters. Eliminates the need for lock nuts and lock washers. Seals threads to prevent corrosion damage. Temperature range: -65°F to 300°F. Removable with regular hand tools. Applications include bolts on valve covers, water pumps, and oil pans.

High strength formula provides 160 ft. lbs. locking force on a 3/8-16 oily fastener. Designed for locking fasteners up to 1" diameter in severe vibration and shock conditions. Adds up to 3000 P.S.I. shear strength for superior hold. Temperature range: -65°F to 300°F. Applications include cylinder block studs, ring gear bolts, and automotive suspension bolts.

Non-running gel eliminates runs, drips, and waste. No-mess gel-pump dispenser for ease of use. Fast and easy application. Versatile for threaded and press-fit assemblies, adding up to 3000 P.S.I. shear strength. Wide temperature range: -65°F to 300°F. High strength formula locks fasteners permanently, ideal for up to 1-1/2" diameter fasteners. Applications include cylinder block studs, ring gear bolts, and more.